![]() Basically block off the EGR outlet so no exhaust gasses get to the inlet pipe. ![]() With these bolts removed, gently move away that end of the braided pipe and using a small knife remove the old gasket which will be stuck to the EGR flange, using a new paper gasket at the EGR side (you'll see why in a minute) put the EGR blanking plate in here. Instead of removing the EGR from the exhaust manifold just disconnect the flange at the EGR side of the braided pipe, from the passenger side of the car looking straight at the EGR valve, you see the braided hose? Remove the 2 bolts that connect this hose to the EGR valve (You will need a 10mm socket and a small extension bar and a ratchet). ![]() ![]() Click to expand.Well at the moment I didn't take the origional hose off yet, until you buy a straight hose to go to the inlet from the intercooler you can still keep the standard hose in place. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |